Cavity Wall Stabilisation And Insulation

Insulating and stabilising Cavity walls

ECO grants (non-repayable) are available for cavity walls. Foamseal Technitherm Cavity Wall stabilisation and Insulation System qualifies for all of the ECO HTT types listed below:

Cavity Wall Stabilisation And Insulation

  • Narrow cavities down to 25mm
  • All Exposure Zones
  • High Rise Buildings
  • Properties 3 stories and more
  • Non-traditional construction
  • Walls suffering from wall tie failure
  • Any property which a chartered surveyor has reported not suitable for standard insulation

Cavity wall stability

Insulating Your Cavity Walls In West SussexFoamseal is used to restore the structural stability and reduce the thermal transmittance of existing cavity walls in which the conventional wall ties have corroded. It is also used in new masonry cavity wall construction where the better thermal performance helps meet the requirements for the Code For Sustainable Homes.

 BASF WALLTITE CV 100 CAVITY WALL INSULATION
 BASF WALLTITE CV 100 CAVITY WALL STABILISATION SYSTEM

Air pressure test

Foamseal Technitherm is also very effective in eliminating unwanted air leakage and assists greatly in helping to meet air pressure tests.

The superb insulation value of the foam and its ability to seal without shrinkage or gaps make it the most efficient cavity insulation material available today.

BBA Certificate 97/3426 Technitherm Cavity Stabilisation and Insulation