Foamseal 600 DIY Kit (Slow Rise)
£632.40 | £527.00 ex.VAT
Foamseal 600 – 2-part polyurethane foam – Slow Rise
Portable twin cylinder pack with sufficient material to cover 600 board feet (60ft x 10ft x 1in depth).
- Twin hoses and connectors
- Applicator gun
- Latex gloves
- Sachet of Vaseline
- Sloping ceilings
- Flat roofs
- Wall cavities
- Marine floatation
- Pipes and tanks
- Cold storage
- Refrigeration transportation
- Hot tubs
Fire Retardant. 56m2@25mm
Polymeric Isocyanate, Polyol Resins and HFC propellant.
Class 1 Surface Spread of Flame (ASTM E- 84)
Foamseal contains fire retardants. However in common with all organic materials it is combustible and extreme caution should be taken with the use of naked flames. In essence it is more difficult to ignite than, say, wood, but in a fire situation it will burn and, as with all organic materials, give off toxic fumes.
Although Foamseal has a nominal density of 1.5 pcf, the density tends to rise to 2.0 pcf or more if used in confined areas.
The foam adheres to most substrates except materials such as Teflon, silicone and polyethylene. Foam also adheres to itself, allowing layers to build up to desired thickness.
Please carefully read and strictly adhere to the directions, warnings and cautions given. The user assumes all risk as to the use of the product. Failure to follow all instructions, directions, warnings and cautions shall release The Company from any and all liability. This product is warranted to be free from defects. The Company shall not be liable for any consequential or other damage or remedy; its sole obligation and your exclusive remedy are limited to product replacement. There are no warranties which extend beyond the description on the face of hereof.
For information, call: 01798 345400.
|Dimensions||43.5 x 32 x 32 cm|